MTX Audio JH15001 Jackhammer Series 1650W x 1 @ 1-Ohm Class D Mono Block Amplifier

MTX JH15001\nJackhammer Series 1500 Watt Monoblock Subwoofer Amplifier\n\nEasy Access Controls\nAccessing the fully adjustable gain, low pass filter, subsonic filter and bass boost from the front panel allows for easy adjustment after the unit is installed. This layout is simple and elegant, giving the JH15001 a sophisticated look with the convenience of easy accessibility.\n\nOnly What You Need\nThe JH15001 is designed for one thing, bringing the power to whatever subwoofers you hook it up to. The input section features high quality RCAs for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don’t have RCA outputs. The Auto Turn On feature is selectable, enabling the unit to turn on when it senses signal, eliminating the need to run a remote wire, or it can be turned on using a remote wire, the choice is yours.\n\nHigh Quality Power and Speaker Connections\nThe JH15001 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. The speaker connection terminal has two sets of positive and negative terminals for easy wiring, the JH15001 can play loads down to 1. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.\n\nFEATURES\n Variable Subsonic Filter\n Top Mount Controls\n Variable Crossovers\n Selectable Turn On Input\n Selectable Input Signal\n Remote Bass Knob\n\n\nSPECIFICATIONS\n Description: Mono Block\n Topology: Class D\n 4 RMS Power Output: 650W x 1 Channel\n 2 RMS Power Output: 1100W x 1 Channel\n 1 RMS Power Output: 1650W x 1 Channel\n Signal to Noise Ratio: 68dB\n Frequency Response: 20Hz – 250Hz\n Crossover: 40Hz to 250Hz, 12dB/Oct\n Subsonic Filter: 20Hz to 50Hz, 12dB/Oct\n Bass Boost: 0 – 12dB @ 45Hz\n Maximum Input Signal: 10V\n Height: 2.57\” (65.2mm)\n Width: 7.61\” (193.4mm)\n Depth: 15.28\” (388mm)\Variable Subsonic Filter – A variable low frequency, high pass filter designed to block potentially damaging bass frequencies”,”Top Mount Controls – Provides for Easy Adjustment of the Amplifier Once Installed”,”Variable Crossovers – Allow Fine Tuning Your System Output”,”Selectable Turn On Input – Allows the Use of a Remote Turn On Signal or Audio Signal to Turn On the Amplifier”,”4 RMS Power Output\t650W x 1 Channel\n2 RMS Power Output\t1100W x 1 Channel\n1 RMS Power Output\t1650W x 1 Channel\